Journal of Environmental Biology

Drying, burning and emission characteristics of beehive

charcoal briquettes: An alternative household fuel of

Eastern Himalayan Region 

S. Mandal¹*, Arvind Kumar¹, R.K. Singh¹, S.V. Ngachan¹ and K. Kundu²

¹Division of Agricultural Engineering, ICAR Research Complex for NEH Region, Umiam - 793 103, India

²Department of Biofuel, MERADO, Central Mechanical Engineering Research Institute- CSIR, Ludhiana-141 006 , India

*Corresponding Author E-mail: smandal2604@gmail.com

Publication Data

Paper received:

26 September 2012

Revised received:

25 May 2013

Re-revised received:

25 July 2013

Accepted:

19 August 2013

Abstract

Beehive charcoal briquettes were produced from powdered charcoal in which soil was added as binder. It was found to be an eco-friendly, clean and economic alternative source of household fuel for the people of Eastern Himalayan Region. Experiments were conducted to determine natural drying behaviour, normalised burn rate, temperature profile and emission of CO, CO₂, UBHC (unburnt hydrocarbons) and NO_x of beehive briquettes prepared from 60:40; 50:50 and 40:60 ratios of charcoal and soil. It was observed that under natural drying conditions (temperature, humidity) briquettes took 433 hr to reach equilibrium moisture content of 5.56?10.29 %.? Page's model was found suitable to describe the drying characteristics of all three combinations. Normalised burn rate varied between 0.377?0.706% of initial mass min^-1. Total burning time of briquette ranged between 133?143 min. The peak temperature attained by briquettes ranged from 437 ?C to 572 ?C.? All the briquette combinations were found suitable for cooking and space heating. Emission of CO, CO₂, UBHC, NO and NO₂ ranged between 68.4?107.2, 922?1359, 20.9?50.8, 0.19?0.29 and 0.34?0.64 g kg^-1, respectively which were less than firewood. ? 

 Key words

Beehive briquette, Burn rate, Emission, Natural drying, Renewable fuel, Temperature profile 

Copyright ? 2014 Triveni Enterprises. All rights reserved. No part of the Journal can be reproduced in any form without prior permission. Responsibility regarding the authenticity of the data, and the acceptability of the conclusions enforced or derived, rest completely with the author(s).